CEP Short Term Course On

Modelling & Simulation

October 20 – 21, 2003

INTRODUCTION

Modeling and simulation is very important in product development cycle. This helps the designer in quick and better products at low cost. To facilitate the quick solution it is important to create models, which are simple and accurate and represent the pysical system. This course aims at understanading the mathematical models and their pysical behavior. Techniques used for solving the mathematical models and performing simulation in different environment will be covered during the course. Realtime simulation is critical when hardware is in the loop. This course also covers the topics on real-time simulation and hardware in loop simulation. Each lecture is backed up by the examples and laboratory session. An exposure to this course will help in modeling a complex engineering system and conducting the simulations, as a design aid.

COURSE COVERAGE

Day 1

Lecture (2 Hours) : Simulation and Modelling Fundamentals : What is System Modelling? Engineering Vs. Non-engineering Systems; General Modelling Techniques; What is Simulation? Realtime Vs. Non-realtime Simulations; Simulation Methodology; Examples of Engg. Systems Modelling; Mechanical Systems; Electrical Systems; Thermal Systems; Hydraulic Systems; Hybrid Systems; Examples of Non-realtime Simulations. Time Solution of 1^st & 2^nd Order Dynamic Systems.

Laboratory (One and a Half hours) : Tutorial Sesion on Modelling of Different Types of Engineering Systems.

Lecture (Two Hours) : Simulation Types, Tools and Simulators : Software Simulation and Simulators. Engineering Simulators. Basic Philosophy of Simulator Building; Examples of Software Simulators & Simulation: RSMITH, HQPACK, AEROSIM

Laboratory (Two hours) : Demonstration of Software Simulation Packages, Solution of Example Problems, using MATLAB/SIMULINK.

Day 2

Lecture (Two Hours) : Realtime and Hardware-in-Loop Simulation : Realtime Systems & Simulation Issues; Hardware-in-Loop Simulators; In-flight Simulators.; Examples of Hardware-in-Loop Simulators.

Laboratory (One and a Half hours) : Demonstration of Hardware-in-Loop Simulator; Tutorial Session on Simulator Building.

Group Project/Assignment (Two Hours) : 2-3 Participants per group to complete a defined modelling and simulation task.

Discussions & Feedbacks (One Hour):

FACULTY

• Prof. A. Joshi (ashokj@aero.iitb.ac.in), Course Co-ordinator, Aerospace Engineering

• Prof. H. Arya (arya@aero.iitb.ac.in), Aerospace Engineering

WHO MAY BENEFIT?

Target audience is NOT the main work force looking at modeling & simulation. The audience will be members who want to initiate work in this field or who should develop a feel, appreciation and awareness about modeling & simulation. The course is aimed at creating awareness about the steps involved in modeling & simulation and what is required to realize the simulation.

FACILITY

CASDE is equipped with simulation packages, which are general in nature and also specific to aerospace simulation. Various experimental setups are available to conduct the specific studies in this field.

VENUE

Centre for Aerospace Systems Design & Engg. (CASDE), Deptt. of Aerospace Engineering, IIT Powai, Mumbai – 400 076.

COURSE FEES

The course fee per participant will be Rs. 6500/-. (For participants from Govt. organizations and Educational Institutes, the fee per participant will be Rs. 5000/-.) The fee includes course material on a CD, tea and working lunch during the course days.

LODGING & BOARDING

Guest House facility in the campus is available for limited number of participants on payment as per the actuals and with advance request.

REGISTRATION

Please fill out the attached Registration form and mail it along with the course fees to the course coordinator. Fees must be paid by a demand draft drawn in favour of “Registrar, IIT Bombay (CEP A/c)”.

Kindly note that no income tax is to be deducted at source from the course fee payments as IIT Bombay is exempted from the same.

REGISTRATION FORMS MAY BE SENT SO AS TO REACH US NOT LATER THAN SEPTEMBER 29^th, 2003

Please address all communication to:

Prof. Ashok Joshi,

(Course Coordinator)

Dept. of Aerospace Engineering,

Indian Institute of Technology, Bombay

Powai, Mumbai - 400 076.

Tel. : 22-2576 7113, 2576 7840

Fax : 22 – 25729511, 25722602

Gram : Technology, Mumbai - 76

Email : ashokj@aero.iitb.ac.in

R E G I S T R A T I O N F O R M

Two-day Short Term Course on

Modelling & Simulation

October 20 – 21, 2003

NAME (PRINT) :

_____________________________________________________

_________________________________________ Gender: M / F

DESIGNATION : ______________________________________

ORGANIZATION:

_____________________________________________________

MAILING ADDRESS : ____________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

TELEPHONE :__________________ (O) __________________(R)

FAX: _________________ MOBILE: ________________________

EMAIL : ________________________________________________

QUALIFICATIONS :_______________EXPERIENCE : ______ Yrs.

IIT Guest House accommodation required?* YES / NO

(*Guest House bill to be paid directly by participant.)

PAYMENT: D.D. No.: Dt. Rs.

[Demand draft should be drawn in favour of "The Registrar, IIT Bombay (CEP A/c)"].

Date: Signature of Applicant

(XEROX ADDITIONAL COPIES OF THIS FORM, IF NEEDED).